Wednesday, February 4, 2009

Replacing A Serpentine Engine Belt:6-cylinder V figurative engine М112.

______________________________________________________
serpentine belt diagramReplacing A Serpentine Engine Belt:6-cylinder V figurative engine М112.
Removal
1. Remove the fan with viscous clutch.
2. Remove a casing of the fan.
3. Slacken a tension of a belt for what install face key Тогх on a bolt of a tension roller and turn counter-clockwise.
4. Remove a belt.
Installation
5. Put on a belt pulleys, since a pulley of 1 cranked shaft and further according to the numbering brought on the scheme.
6. Slacken a tension roller turn of a key clockwise. Put on a belt completely.
7. Check up position of a belt on pulleys.
8.Iinstall a casing of the fan.
9. Install the fan with viscous clutch.




Fig. 1. Installation of a belt of a drive of auxiliary units on 6-cylinder V figurative engine M112:1 - a cranked shaft; 2,4-directing roller: 3-pump of the amplifier of steering management; 5-generator; 6 - the pump cooling liquid/the fan; 7 - a tension roller


The information was given by beltdrive.50webs.com
_____________________________________________________

No comments: