Serpentine Belt Diagram: 1998 Acura Integra Belt Routing Diagram.

__________________________________________________________

Serpentine Belt Diagram represents 1998 Acura Integra Belt Routing Diagram.
Whenever a serpentine belt replacement is required inspect the pulley condition to ensure there are no sharp edges on any of the pulleys, this will cause the belt to shred and fail. Confirm that all pulleys are free from debris such as small pebbles, these pebbles will cause the belt to pit and significantly impair the belt performance.At performance of works it is necessary to take the inquiry from Serpentine Belt Diagram 1998 Acura Integra.The belt tensioner plays an important role to the drive belt performance, if this tensioner is weak it can allow the belt to lose tension allowing the belt to jump and skip. This condition will result in noises such as squeaking, chirping and ticking.

Read more...

__________________________________________________________


The information was given by beltdrive.50webs.com
_________________________________________________________

Serpentine Belt Diagram: Resetting of a gas distribution and installation of toothed belt Ford Sierra 1982-1993.

__________________________________________________________

Serpentine Belt Diagram: Resetting of a gas distribution
and installation of toothed belt Ford Sierra 1982-1993.

F1g.1. Serpentine Belt Diagram: system of gas distribution Ford Sierra 1982-1993. 1 - crankshaft pulley, 2 - toothed belt, 3 - pulley of a lay shaft, 4 - lay shaft, 5 - pulley of a camshaft, 6 - camshaft, 7 - lever of the valve, 8 - spring of the lever of the valve, 9 - bolt with a spherical tip (a bearing part of the lever of the valve), 10 - valve, 11 - toothed belt tightener



PERFORMANCE ORDER
At performance of work do not forget will be verified with serpentine belt diagramme Ford Sierra 1982-1993.Look: all4you-motor.freehostia.com
1. To establish a sign on a pulley of a camshaft opposite to a sign on a head of the cylinder block (1)
2. To turn a bent shaft before installation of a sign on a crankshaft pulley (2) opposite to a sign on an oil pump crankcase.
3. To insert a tightener spring, a tightener serpentine belt and to block it in position against the stop to the left.
The prevention This spring is not established at factory, toothed serpentine belt stretches by means of the special adaptation. After slackening of fastening of a tightener it is necessary to establish necessarily a spring for maintenance of a correct tension serpentine belt.
4. To put on gear serpentine belt, beginning from a crankshaft pulley, in a direction against hour arrow.Read more...









F1g.2. Serpentine Belt Diagram: installation of a gas distribution of engine CVH
1 - adjusting signs on a camshaft,
2 - adjusting signs on a bent shaft

__________________________________________________________


The information was given by beltdrive.50webs.com
_________________________________________________________

Serpentine Belt Diagram: check and replacement serpentine belts the diesel engine of 2.5 l Audi A4 2000 +.

__________________________________________________________

Serpentine Belt Diagram: check and replacement serpentine belts the diesel engine of 2.5 l Audi A4 2000 +. Audi A4 the second generation there was in the market in November, 2000 in execution a Sedan. Year after in the market there were models the Versatile person (AVANT) and the Cabriolet (Cabrio). The sports variant has been presented in 2002. It is completed petrol and diesel engines. Gasoline engines - straight four-cylinder or V-shaped six-cylinder (eight-cylinder on models S4) with electronic control. Diesel engines -straight four-cylinder or V-shaped six-cylinder. Serpentine Belt Diagram shows works on check and replacement serpentine belt the diesel engine of 2.5 l Audi A4. Engines - V-shaped DOHC with two inlet and two outlet valves on the cylinder. Each number of cylinders has on two cam shafts. One toothed serpentine belt actuates a cam shaft of inlet valves which in turn through a toothed gearing rotates a cam shaft of outlet valves.
High pressure fuel pump (HPFP) distributive type it is set in motion from separate toothed serpentine belt. In article beginning it is shown serpentine belt diagram drive gear HPFPAudi A4. Read more...


Fig.1. Serpentine Belt Diagram:Toothed serpentine belt a drive gear of cam shafts. The diesel engine of 2.5 l
1 - Wheel toothed serpentine belt a bent shaft. Installation is possible only in one position. Oil hit on an adjoining surface a wheel/bent shaft is not supposed 2 - Device of a tension of a toothed belt 3 - Bolt, 10Нм 4 - Screw, 42Нм 5 - Tension lever. Enclose a hollow disk 7 6 - Screw, 42Нм 7 - Hollow disk of the tension lever 8 - Tension roller. Enclose a hollow disk 20 9 - Bolt with a fillet, 75Нм 10 - Cam shaft wheel. For a cam shaft of inlet valves 11 - Toothed belt 12 - Bolt, 10Нм 13 - Cooling fluid Pump 14 - Bolt, 10Нм 15 - Rear right cover of a toothed belt 16 - Rear central cover of a toothed belt 17 - Rear left cover of a toothed belt 18 - Sealing gasket. Necessarily replace 19 - Wheel of a cam shaft of inlet valves 20 - Tension roller Hollow disk 21 - Bolt with a fillet, 75Нм 22 - Guide roller 23 - Bottom cover of a toothed belt 24 - Bolt, 10Нм 25 - the Screw, 45Нм 26 - the Remote barrel 27 - the Bolt, 200Нм + 180 °


Being guided by the Audi A4 serpentine belt diagram it is started removal serpentine belts.Read more...

__________________________________________________________


The information was given by beltdrive.50webs.com
________________________________________________

Serpentine Belt Diagram: replacement serpentine belts auxiliary units Lexus RX300 .

______________________________________________________

Compact off-road car Lexus RX-300 of a category "lux" has appeared in the market in 1998.On an integral body with front and rear stretchers independent suspensions of type the Poppy-ferson with antiroll bars are established. A steering - rack , with the hydraulic booster with variable factor of strengthening. In addition the car is equipped by stabilisation system stability(VSC). Braking system - hydraulic, two-planimetric with the vacuum servo. Brake gears of all wheels the disk; front brake plates ventilated. Unlike variants for the European market on which the parking brake is resulted by the lever located between seats, on models for America the foot drive gear of a parking brake is applied. Base complete set Lexus RX-300 rather rich, but also the list of additions to it enough big, therefore the most popular additions are shown in two "packages" - «Premium» and «Limited», - which provide presence of the leather inner trim decorated by a nut tree, the powerful filter of system of ventilation of interior, and also high quality audiosystem Nacamichi. By request interior it is possible to complete with CD-changer on 6 disks and "neosticking together" mirrors.

During to replacement multiridge serpentine belt the new should be the same size, as well as old.

At installation new serpentine belt it is necessary to pay attention that serpentine belt adjoins closely to pulleys and it is not displaced rather their butts. If multiridge serpentine belt acts in film not for the purpose of its replacement, remember or note a direction of its movement that then to establish serpentine belt the correct party. Use Serpentine belt Diagram.

PERFORMANCE ORDER
1. Give swing and fixing bolts serpentine belt the generator and compressor K/V. Slacken a tension serpentine belt an adjusting bolt also remove serpentine belt.



Fig.1. Replacement serpentine belt auxiliary units Lexus RX300
1 - the Swing bolt
2 - the Fixing bolt
3 - the Adjusting bolt



2. Establish new serpentine belt the generator and compressor K/V in sequence, return to removal. Check up a tension serpentine belt.
3. Give swing and adjusting bolts serpentine belt a drive gear of pump GUR and remove serpentine belt.


Fig.2. Replacement serpentine belt auxiliary units Lexus RX300
1 - the Swing bolt
2 - the Adjusting bolt
3 - the Adjusting buckle





4. Establish new serpentine belt pump GUR in sequence, return to removal. Use Serpentine belt Diagram. Check up a tension serpentine belt.

______________________________________________________


The information was given by beltdrive.50webs.com
______________________________________________________

Serpentine Belt Diagram: check serpentine belts auxiliary units Lexus RX300 .

______________________________________________________

Compact off-road car Lexus RX-300 of a category "lux" has appeared in the market in 1998. On considered models establish engine V6 of 3.0 l. Capacity of 223 h.p. the Four-stage automatic transmission (АТ), united with an interaxle differential by means of viscous clutches, provides a constant all wheel drive with equal distribution of a twisting moment between shafts. The rear bridge is equipped by differential with viscous a clutch of restriction of slippage. The models intended for the American market, can have a drive gear only on front wheels, on these models is applied modified 4-step АТ (without an interaxle differential). Serpentine Belt Diagram tells about condition check serpentine belts Lexus RX300 . Too low tension serpentine belt conducts to its raised deterioration or fast failure. At too high tension there can be damages of bearings of the units, resulted to data belt. It is necessary to check periodically a condition serpentine belt, and at detection of defects, to replace belt.
PERFORMANCE ORDER
1. Fingers walk on all length serpentine belt, feeling it on presence of cracks and stratifications. Also check up, whether is not present on serpentine belt attritions and polish to shine of sites. Serpentine belt it is necessary to inspect from both parties that means its necessity twisting. Be in passing convinced of absence of a rust, cracks and agnails on pulleys. On a work face serpentine belt presence of superficial perpendicular cracks is supposed. If these cracks do not overstep the bounds of one edge and not so deep, to replace serpentine belt there is no necessity.






Fig.1. Condition check serpentine belts auxiliary units Lexus RX300
Deterioration of edges of edges serpentine belt






Fig.2. Condition check serpentine belts auxiliary units Lexus RX300
Cross-section cracks (D) from an underside serpentine belt and bond liftoff edges (E) -







Fig.3. Condition check serpentine belts auxiliary units Lexus RX300
drawing waste lateral edges (F), cracks (H) and bond liftoff lateral edges (G)






Fig.4. Condition check serpentine belts auxiliary units Lexus RX300
Separation of edges (J), cracks (K)




2. Make sure of correctness of position serpentine belt on pulleys, using Serpentine belt Diagram.






Fig.5. Condition check serpentine belt auxiliary units Lexus RX300




3. Check up a tension serpentine belt by means of the special adaptation and compare the received results to requirements of Specifications Serpentine belt Diagram.


Тension serpentine belt compressor K/V and the generator it is necessary to check on a site between them.

______________________________________________________


The information was given by beltdrive.50webs.com
______________________________________________________