Sunday, July 5, 2009

Serpentine Belt Diagram: replacement serpentine belts auxiliary units Lexus RX300 .

______________________________________________________
serpentine belt diagramCompact off-road car Lexus RX-300 of a category "lux" has appeared in the market in 1998.On an integral body with front and rear stretchers independent suspensions of type the Poppy-ferson with antiroll bars are established. A steering - rack , with the hydraulic booster with variable factor of strengthening. In addition the car is equipped by stabilisation system stability(VSC). Braking system - hydraulic, two-planimetric with the vacuum servo. Brake gears of all wheels the disk; front brake plates ventilated. Unlike variants for the European market on which the parking brake is resulted by the lever located between seats, on models for America the foot drive gear of a parking brake is applied. Base complete set Lexus RX-300 rather rich, but also the list of additions to it enough big, therefore the most popular additions are shown in two "packages" - «Premium» and «Limited», - which provide presence of the leather inner trim decorated by a nut tree, the powerful filter of system of ventilation of interior, and also high quality audiosystem Nacamichi. By request interior it is possible to complete with CD-changer on 6 disks and "neosticking together" mirrors.

serpentine belt diagramDuring to replacement multiridge serpentine belt the new should be the same size, as well as old.

At installation new serpentine belt it is necessary to pay attention that serpentine belt adjoins closely to pulleys and it is not displaced rather their butts. If multiridge serpentine belt acts in film not for the purpose of its replacement, remember or note a direction of its movement that then to establish serpentine belt the correct party. Use Serpentine belt Diagram.


PERFORMANCE ORDER

1. Give swing and fixing bolts serpentine belt the generator and compressor K/V. Slacken a tension serpentine belt an adjusting bolt also remove serpentine belt.



serpentine belt diagram
Fig.1. Replacement serpentine belt auxiliary units Lexus RX300

1 - the Swing bolt

2 - the Fixing bolt

3 - the Adjusting bolt



2. Establish new serpentine belt the generator and compressor K/V in sequence, return to removal. Check up a tension serpentine belt.

3. Give swing and adjusting bolts serpentine belt a drive gear of pump GUR and remove serpentine belt.



serpentine belt diagramFig.2. Replacement serpentine belt auxiliary units Lexus RX300
1 - the Swing bolt
2 - the Adjusting bolt

3 - the Adjusting buckle






4. Establish new serpentine belt pump GUR in sequence, return to removal. Use Serpentine belt Diagram. Check up a tension serpentine belt.

______________________________________________________

serpentine belt diagram
The information was given by beltdrive.50webs.com
______________________________________________________

No comments: